Service Menu - Mercedes-Benz Metris Operator's Manual

On-board computer (vehicles with steering wheel buttons)
184
Press a to confirm.
X
The current status is shown.
To activate/deactivate: press a again.
X
If the å warning lamp in the instrument
cluster lights up when the vehicle is ready to
®
drive, ESP is deactivated.
If the ÷ warning lamp lights up continuously,
®
ESP is not available due to a malfunction.
Observe the information on warning lamps
( page 221) and display messages
Y
( page 207).
Y
Activating/deactivating the distance
warning function
Using the steering wheel buttons
Press = or ; to select the
X
menu.
Press 9 or : to select
X
Warning.
Press a to confirm.
X
The current status is shown.
To activate/deactivate: press the a but-
X
ton again.
If the distance warning function of COLLISION
PREVENTION ASSIST is activated, the display
shows the Ä symbol in the header.
At speeds up to approx 20 mph (30 km/h),
the display in vehicles with Active Parking
Assist first shows the í status indicator.
Only from a speed of about 20 mph (30 km/h)
does the display show the Ä symbol
instead of the í status indicator.
Further information can be found under "COL-
LISION PREVENTION ASSIST" (
Setting ATTENTION ASSIST
Using the steering wheel buttons
Press = or ; to select the
X
menu.
Press : or 9 to select
X
Assist.
Press a to confirm.
X
The current setting is displayed.
To change the setting: press a again.
X
Press : or 9 to set Deactivated,
X
Standard or Sensitive.
Press a to confirm the choice.
X
If ATTENTION ASSIST is activated, the À
symbol is shown in the status area of the dis-
play. The selection
sets the sensitivity with which the system
determines the attention level.
Further information can be found under "ATTEN-
TION ASSIST" (
Activating/deactivating Blind Spot
Assist
Using the steering wheel buttons
Press = or ; to select the
X
menu.
Press : or 9 to select
X
Assist.
Press a to confirm.
X
The current status is shown.
To activate/deactivate: press the a but-
Assist.
X
ton again.
Distance
Further information can be found under "Blind
Spot Assist" (
Setting Lane Keeping Assist
Using the steering wheel buttons
Press = or ; to select the
X
menu.
Press : or 9 to select
X
Assist.
Press a to confirm.
X
The current selection
is displayed.
To change the setting: press a again.
X
Further information can be found under "Lane
Keeping Assist" (
page 143).
Y

Service menu

Assist.
Attention
Standard or
page 149).
Y
Blind Spot
page 145).
Y
Lane Keeping
Standard or
page 147).
Y
Sensitive
Assist.
Assist.
Adaptive