Bluetooth Function - Sharp AQUOS CRYSTAL 2 User Manual

178
Display (Touchscreen)
Handset Display is Touchscreen.
If Display is wet, wipe it with a soft cloth.
・Touchscreen may not respond in these situations:
・Use with gloves/long fingernails
・Use of pens, pencils or sharp objects
・Use with objects on/against Display
・To prevent malfunctions, do not:
・Touch Display with wet fingers
・Use if Display is wet
・Subject Display to force/pressure
・Place a sticker or shield (commercially-available protective
film, privacy protector shield, etc.) on Display
・To improve response, calibrate Touchscreen as follows.
In app sheet, (Settings)
touch panel Follow onscreen prompts
・ In the following cases, Press
Press again to turn on Display and then operate
handset.
・Handset operates automatically without touch input
・Handset does not respond to touch input
TV Antenna Cable
To view or record One Seg, connect TV Antenna Cable to
Earphones-Microphone Port.
・Earphones-microphone can be connected to use with TV
Antenna Cable.
・Insert plug firmly. If plug is not inserted all the way,
broadcasts may not be received or audio may not be heard.
・As connection may be poor if Port is dirty, clean with a dry
cotton swab, etc. Avoid damaging Port when cleaning.
・Do not deform TV Antenna Cable plug or Earphones-
Microphone Port. Deforming may cause malfunction.
・Bringing earphone cord, etc. close to handset may result in
noise.
Earphones-Microphone Port
Earphones with Mic (SHLDL1) are available for separate
purchase. Other earphones-microphone may not function
properly on handset.
・Do not subject Earphones-Microphone Port to strong impact
while using earphones-microphone; water resistance may be
affected.
Self Check
If handset is unstable, diagnose the cause as follows.
In app sheet, (Settings)
Follow onscreen prompts
About phone Adjust
to turn off Display,
Useful Self check
Forcing Power Off
If handset has stopped processing or won't respond to
operation, power off forcibly as follows.
・
(Long Press for at least 8 seconds)
Release finger after vibration; handset powers off.
Bluetooth Function
®
SoftBank Corp. is not liable for any damages resulting from
data/information leakage due to use of handset Bluetooth
function.
■Precautions
The frequency band utilized by handset Bluetooth
is shared with industrial, scientific or medical equipment,
including household microwave ovens, and used by radio
stations, amateur radio stations, etc. (hereafter "other radio
stations").
1. Before using Bluetooth , visually check that no other radio
®
stations sharing the same frequency band are in use nearby.
2. Should interference occur between handset and other radio
stations, move it to a different location or cancel Bluetooth
function immediately.
3. For additional information and support, contact SoftBank
Customer Support, General Information: From a SoftBank
handset, call toll free at 157. To call toll free from a
landline/IP phone, see "Customer
・Frequency Band
This radio station utilizes 2.4 GHz band.
FH1 indicates FHSS modulation with maximum transmission
radius of 10 meters.
XX4 indicates a different modulation scheme with maximum
transmission radius of 40 meters.
It is not possible for the radio station to avoid using the
frequency band of a mobile unit identification apparatus.
®
function
®
®
Service."