Storage Settings - Sharp AQUOS CRYSTAL 2 User Manual

142

Storage Settings

Storage Settings

Check handset and SD Card memory space, mount or unmount
SD Card, and erase SD Card files. Settable items are the
following.
・Available items vary depending on status of SD Card, etc.
Item
Check total handset memory/SD Card
Total space
space.
Check free handset memory/SD Card
Available
space.
Mount Mount SD Card for use on handset.
microSD See "Unmounting SD
Unmount Unmount SD Card to remove it safely.
microSD See "Unmounting SD
Format SD Card.
Erase microSD
See "Formatting SD
Encrypt
Encrypt SD Card.
microSD
Release
microSD Decrypt SD Card.
encryption
Export to
Copy files in handset memory to SD Card.
microSD
Import to
Copy files in SD Card to handset memory.
phone
In app sheet, (Settings)
Storage
Storage menu opens.
Description
Card" for details.
Card" for details.
Card" for details.
Set each item
Setting is complete.
Storage Operations
Encrypting/Decrypting SD Card Files
In Storage menu, Encrypt microSD
encryption CONFIRM
OK START
・Set Lock No. passcode/password for unlocking screen
beforehand.
Copying Files in Handset Memory to SD Card
In Storage menu, Export to microSD
・If confirmation appears, follow onscreen prompts.
Copying Files in SD Card to Handset Memory
In Storage menu, Import to phone
・If confirmation appears, follow onscreen prompts.
Setting Preferred USB Connection Mode
In Storage menu, USB connection
connection mode
Cautions for SD Card Encryption/
Decryption
Observe the following when encrypting/decrypting SD Card
files.
・Charge handset adequately beforehand, and keep handset
charged during the process.
・Set Lock No. passcode/password for unlocking screen
beforehand.
・Encryption/decryption is not available if there is not
enough free space on SD Card.
・Encrypted SD Card cannot be used on any device other
than the one used for encrypting the SD Card.
・To use encrypted SD Card normally, decrypt the SD Card.
・If you perform Reset all with SD Card encrypted, files on
the SD Card will be unusable. Disable encryption before
performing Reset all.
・SD Card becomes read-only when installed in a device
that has been used for encrypting another SD Card.
・To write to read-only SD Card, encrypt it.
・SD Card encryption/decryption may take some time. Do
not stop charging or remove SD Card during the process.
If the process is interrupted, SD Card files may be lost.
/ Release microSD
Enter Operation Password
YES
YES
Tap