Pairing With Other Bluetooth Devices - Sharp AQUOS CRYSTAL 2 User Manual

Setting Whether to Always Use Handsfree
Device for Calls
In Bluetooth menu, Handsfree setting
®
・Available when Bluetooth is enabled.
®
・ Tap
Handsfree setting to toggle on (
・When Handsfree setting is enabled, notification of
incoming calls appears on both handset and handsfree
device; use handsfree device for conversations even if
calls answered on handset. When the setting is disabled,
talk on whichever device used for answering the call.
Troubleshooting
Q. Cannot use Bluetooth
®
A. Airplane mode may be active. Activating Airplane mode
disables Bluetooth . (Bluetooth
®
while Airplane mode is active.)
)/off ( ).
can be enabled again
®
Pairing with Other Bluetooth
Pair nearby Bluetooth devices with handset to transfer files,
®
for handsfree conversations, or to listen to music.
・Enable Bluetooth on handset and set target devices to be
®
discoverable first.
In app sheet, (Settings)
Bluetooth menu appears; found Bluetooth
®
in Available devices field.
・ If target device does not appear, Tap
try searching again.
Tap target device Follow onscreen prompts for
authentication
Pairing completes; handset connects to some devices (e.g.,
handsfree devices) automatically.
・Authentication procedure varies by device. Passkey entry
may be required.
・Passkey is a 1 to 16-digit alphanumeric code required for
authentication between handset and other devices.
・Paired devices appear in Paired devices field.
Pairing Operations
Renaming Paired Devices
In Bluetooth menu, for target device
®
name Enter name OK
・Available when Bluetooth is enabled.
®
・Renaming may not be possible if a pictogram is used.
Unpairing Devices
In Bluetooth menu, for target device
®
・Available when Bluetooth is enabled.
®
Connecting to Bluetooth
In Bluetooth menu, for target device
®
・Available when Bluetooth is enabled.
®
・Available when handset is paired with compatible devices.
109
Devices
®
Bluetooth
devices appear
®
Refresh to
Tap
FORGET
Devices by Service
®
Tap item