Maintenance - Beko CTB 6250 W User Manual

5

Maintenance

5.1 Grease Filters
5.1.1Cleaning Metal Self-
Supporting Grease Filters
• The filters must be cleaned every 2 months, or
more frequently in case of particularly heavy
use of the hood Filters can be washed in a dish-
washer
• Pull out the sliding suction panel
• Remove the filters one by one, after having dis-
connected the relative fastening elements
• Wash the filters, taking care not to bend them
Let them get dry before refitting them (The col-
our of the filter surface may change throughout
the time but this has no influence to the filter
efficiency)
• When refitting the filters, make sure that the
handle is visible on the outside
• Close the sliding suction panel
5.2 Charcoal filter (Recycling
version)
5.2.1 Replacing Charcoal Filters
A
Warning: Turn the lights off and
wait until the lamps cool down
before you change the odour filter
• These filters are not washable and cannot be
regenerated, and must be replaced approxi-
mately every four months or more frequently
by particularly heavy use
Hood / User Manual
• Pull out the sliding suction panel
• Remove the grease filters
• Remove the saturated carbon filter by releasing
the fixing hooks
• Fit the new filter by hooking it into its seating
• Replace the grease filters
• Close the sliding suction panel
5.3 Lighting
5.3.1 Light Replacement
28W light
• Remove the metal grease filters
• Unscrew the bulbs and replace them with new
ones having the same characteristics
• Replace the metal grease filters
126
11 / EN