Preparation; What To Do For Energy Saving; First Use - Beko RCNE450K40ZW User Manual

Preparation

4
4.1. What to do for
energy saving
Connecting the product to
A
electronic energy-saving systems
is harmful, as it may damage the
product.
• Do not keep the refrigerator doors
open for long periods.
• Do not place hot food or beverages
into the refrigerator.
• Do not overfill the refrigerator;
blocking the internal air flow will
reduce cooling capacity.
• In order to store the maximum
amount of food into the cooler
compartment of your refrigerator, you
should take out the upper drawers
and place it onto the glass rack. The
declared energy consumption of your
refrigerator was determined by taking
out the cooler, ice tray and upper
drawers in a way that will enable
maximum storage. Using the below
drawer when storing is strongly
recommended. Energy saving
function should be activated for best
energy consumption.
• You should not block the airflow by
putting food in front of the cooler
fan. A space of minimum 3cm must be
left in front of the protective fan wire
when placing food.
• Depending on the product's features;
defrosting frozen foods in the cooler
compartment will ensure energy
saving and preserve food quality.
• Food should be stored using the
drawers in the cooler compartment
in order to ensure energy saving and
protect food in better conditions.
• Food packages should not be in direct
contact with the heat sensor located
in the cooler compartment. If they are
in contact with the sensor, energy
consumption of the appliance might
increase.
Refrigerator / User Guide
• Make sure the foods are not in
contact with the cooler compartment
temperature sensor described below.

4.2. First Use

Before using your refrigerator, make sure
the necessary preparations are made
in line with the instructions in "Safety
and environment instructions" and
"Installation" sections.
• Keep the product running with no
food inside for 6 and do not open the
door, unless absolutely necessary.
C
A sound will be heard when the
compressor is engaged. It is
normal to hear sound even when
the compressor is inactive, due to
the compressed liquids and gasses
in the cooling system.
C
Front edges of the product might
heat up. This is normal. These
areas are designed to warm up in
order to prevent condensation.
C
In some models indicator panel
turns off automatically 5 minutes
after the door closes. It will be
reactivated when the door is open
or any button is pressed.
13/32 EN