Using The Automatic Adjustment Feature - Hitachi CP-BX301WN User Manual

Operating
Use the focus ring to focus the picture.

Using the automatic adjustment feature

1.
Press AUTO button on the remote control.
Pressing this button performs the following.
 For a computer signal
The vertical position, the horizontal position and the horizontal
phase will be automatically adjusted.
Make sure that the application window is set to its maximum size
prior to attempting to use this feature. A dark picture may still be
incorrectly adjusted. Use a bright picture when adjusting.
 For a video signal
The video format best suited for the respective input signal will be selected
automatically. This function is available only when the AUTO is selected for
the VIDEO FORMAT item in the INPUT menu (41). The vertical position and
horizontal position will be automatically set to the default.
 For a component video signal
The vertical position and horizontal position will be automatically set to the default.
The horizontal phase will be automatically adjusted.
● The automatic adjustment operation requires approx. 10 seconds. Also please
note that it may not function correctly with some input.
● When this function is performed for a video signal, a certain extra such as a line
may appear outside a picture.
● When this function is performed for a computer signal, a black frame may be
displayed on the edge of the screen, depending on the PC model.
● The items adjusted by this function may vary when the FINE or DISABLE is selected
for the AUTO ADJUST item of the SERVICE item in the OPTION menu (64).
FOCUS ring
AUTO button
INPUT IWB CALIBRATION
ASPECT AUTO ACCENTUALIZER HDCR
D-ZOOM
- +
PAGE VOLUME
MAGNIFY MYBUTTON
UP ON
1 ＋
DOWN OFF 2 ー
KEYSTONE TEMPLATE FREEZE AV MUTE
ESC MENU
ENTER
POSITION RESET
25