Hitachi CP-BX301WN User Manual page 106

Troubleshooting
Regarding the indicator lamps (continued)
POWER LAMP
indicator indicator
Lighting Lighting
In Orange In Red
Blinking Blinking
Orange Red
In In
Turned Turned
off off
NOTE
• When the interior portion has become overheated, for safety purposes,
the projector is automatically shut down, and the indicator lamps may also be
turned off. In such a case, disconnect the power cord, and wait at least 45 minutes.
After the projector has sufficiently cooled down, please make confirmation of the
attachment state of the lamp and lamp cover, and then turn the power on again.
106
TEMP
indicator
Lighting Loading the saved data of CLONING on STANDBY
In Red MODE.
Loading the saved data of CLONING has failed on
Blinking
STANDBY MODE.
Red
In
Please refer to CLONING (68 ~ 71).
Turned Loading the saved data of CLONING has
off succeeded on STANDBY MODE.
Description