Audio Format - Panasonic SC-HTE200 Operating Instructions Manual

Enhance the harmonic bass
effect.
H.BASS
ON
OFF
The 3D Clear Mode Dialog
feature creates a sound field
similar to the sound coming
from a TV screen and makes
dialogues clearer.
ON: 3D Surround, Clear
3D CLR
Mode Dialog and Dolby
DIALOG
Virtual Speaker effect
OFF: Dolby Virtual Speaker
effect
The setting is set back to
"ON" every time you turn the
main unit on.
Sets the preferred audio
channel mode when there
are two audio modes
received by this system.
M1: Main
M2: Secondary
DUAL AUDIO
M1 + M2: Main + Secondary
This effect only works if the
audio output of the TV or
player is set to "Bitstream" and
"Dolby Dual Mono" is available
in the sound source.
Auto gain control prevents
sudden loud sound by reducing
the sound level automatically
when the input is too high.
This function is suitable for
AGC TV broadcast that has sound
level difference.
ON
OFF
If the sound becomes
unnatural, select "OFF".
Enhance the dialog in low
volume condition.
ON
LOW VOL
OFF
MODE
Select "OFF" to cancel this effect
if the dialog does not sound
natural in low volume condition.
≥ The default setting is underlined. Changed settings will be
kept until it is changed again, unless otherwise indicated.

Audio format

You can view the current audio format.
Press and hold [SOUND] for more than 4
sec.
DOLBY Dolby Digital is the audio
DIGITAL source.
DTS DTS
Linear pulse-code
PCM MULTI modulation is the audio
source.
2 channel pulse-code
PCM modulation is the audio
source.
Analogue is the audio
ANALOG
source.
≥ The audio format is displayed for about 2 seconds.
≥ No audio format is displayed if input to this unit is
Bluetooth .
®
is the audio source.
®
17
SQT0858