Using This System - Panasonic SC-HTE200 Operating Instructions Manual

Using this system

Operations
Preparation
≥ Turn on the TV and/or connected device.
1
2
INPUT
SETUP

1 Press [Í] to turn on the main
unit.
2 Select the source.
Press
Input changes in the
following order each time
you press [INPUT].
"TV"# "BD/DVD"# "AUX"
[INPUT]
≥ When switching the source to
Select the Bluetooth
[ -PAIRING] device as the source.
(
≥ This remote control cannot be used to control the
operations of the connected devices.
∫ When you select "BD/DVD"
Change the input on the TV to the one this unit
is connected to, then start play on the device
connected to this unit.
∫ When you select "AUX"
Start play on the device connected to the audio
input terminal on this unit.(
from an other device (AUX)")
∫ When you select "BLUETOOTH"
Start play on the Bluetooth
this unit.
SOUND
OK

To select
^----"BLUETOOTH"(-}
"BLUETOOTH" and then to
"TV" in succession, after
switching it to "BLUETOOTH",
wait for a while, and press
[INPUT].
®
13, 14)
10, "Connection
device connected to
®
∫ To adjust the volume of this system
Press [j VOL i].
≥ Volume range: 0 to 100
∫ To mute the sound
Press [MUTE].
≥ While muting, "MUTE" is indicated on the display.
≥ To cancel, press the button again or adjust the volume.
≥ Muting is cancelled if the main unit is turned off.
If this system does not operate as
expected or sound is unusual, returning
the settings to the factory preset may
solve the problem. (
≥ If there is sound coming out of the TV's speakers, reduce
the volume of the TV to its minimum.
≥ There may be a difference in the maximum volume value
of the TV and the unit.
≥ When playing equipment connected to the HDMI AV IN
terminal, to switch audio/video to the TV, switch input to
the TV tuner. If VIERA Link (HDMI) (
enabled, also switch the input of this unit to TV.
20)
19) is not
15
SQT0858