Lets Take A Tour Of Your New Neptune; Description Of Main Body - Emco Tech Neptune Owner's Manual

LETS TAKE A TOUR OF YOUR NEW NEPTUNE

ⓔ
ⓒ
ⓑ
ⓘ
ⓙ
ⓖ
ⓚ
9

DESCRIPTION OF MAIN BODY

ⓐ Front Cover
ⓑ Filter Access Door
ⓓ
ⓒ Reset Button
ⓓ Control Panel
ⓕ
ⓔ Calcium Port
ⓐ
ⓕ Flexible Stainless Steel Alkaline Water Outlet
ⓖ Back Cover
ⓗ Key Hole Slots
ⓗ
ⓘ Main Power Switch
ⓙ Fuse Holder
ⓚ Power Cord
ⓛ Tap Water Inlet
ⓜ Acidic Water Outlet
ⓛ
ⓜ
Easy to clean and durable plastic casing protects your ionizer.
You will open this door to access and change your filter.
Depress this button until your digital filter life indicator resets to 0000.
Push Button Controls and function indicators (detailed on the next page).
This is where you can add the optional Calcium.
Note: IonLife recommends that only those in soft water areas, or in situations where pH
is not properly elevated utilize this feature.
You will get your drinking water from this spout.
It is flexible to accommodate proper positioning.
Do not attempt to remove panel.
To save counter space you can mount your ionizer on the wall.
Note: use suitable fasteners.
You will use this switch on the back to turn on and off the power supply to your ionizer.
Your ionizer comes equipped with a fuse to protect it in case of power surge or fluctuation.
This is your 110v AC power cord. Always use a GFI outlet in good working order.
This is labeled with a blue sticker and is where the tap water will enter your ionizer.
This is labeled with a red sticker and is where the acidic stream will exit your ionizer.
10