Date/Time Settings; Built-In Clock's Rechargeable Lithium Battery - JVC GR-DVP7 Instructions Manual

Date/Time Settings

The date/time is recorded onto the tape at all times,
but its display can be turned on or off during
playback. ( pg. 38, 48)
SET/SELECT Button
POWER Lamp
Power Switch
Lock Button
1
Set the Power Switch to "M" while pressing down
the Lock Button located on the switch.
2
Open the LCD monitor fully, or pull out the
viewfinder fully.
3
Press MENU. The Menu Screen appears.
4
Press + or – to select "n DISPLAY", and press
SET/SELECT. The DISPLAY Menu appears.
Downloaded From VideoCamera-Manual.com Manuals
MENU Button
+, – Button
W I PE / FADER OF F
PROGR AM AE
W. BAL AN E C
CAMER A
MANUA L
SYSTE M
D I SPL AY
DSC
END
ON SC RE N E – LCD / TV
– A U T O
DATE / T I ME
T I ME CODE – O F F
CLOCK
D E C 25 '
ADJ .
5 3 : 0
RETUR N
5
Press + or – to select "CLOCK ADJ.", and press
SET/SELECT. The parameter for "Month" is
highlighted.
6
Press + or – to input the month, and press SET/
SELECT. Repeat to input the day, year, hour and
minute.
7
Press + or – to select "BRETURN", and press SET/
SELECT twice. The Menu Screen closes.

Built-in Clock's Rechargeable Lithium Battery

To store the date/time in memory, the clock's
rechargeable lithium battery is integrated in the
camcorder. While the camcorder is connected to an
AC outlet using the AC Power Adapter/Charger, or
while the battery pack attached to the camcorder
continues to supply power, the clock's rechargeable
lithium battery is always charged. However, if the
camcorder is not used for approx. 3 months, the
clock's lithium battery will become discharged and
the date/time stored in memory will be lost. When
this occurs, first connect the camcorder to an AC
outlet using the AC Power Adapter/Charger for over
24 hours to charge the clock's rechargeable lithium
battery. Then perform the date/time setting before
using the camcorder.
Note that the camcorder can be used without setting
the date/time.
NOTE:
Even if you select "CLOCK ADJ.", if the parameter is
not highlighted, the camcorder's internal clock
continues to operate. Once you move the highlight
bar to the first date/time parameter (month), the
clock stops. When you finish setting the minute and
press SET/SELECT, the date and time begin
02
PM
operation from the date and time you have just set.
15
EN
CLOCK D E C 25 ' 02
ADJ . 5 3 : 0 PM