Table of Contents
Advertisement
CHAPTER 1: INTRODUCTION
HOW TO USE THIS MANUAL
Make sure to read these operating instructions in their
entirety before configuring a loudspeaker system with
JM-1P loudspeakers. In particular, pay close attention to
material related to safety issues.
As you read these operating instructions, you will encounter
the following icons for notes, tips, and cautions:
NOTE:
A note identifies an important or useful
piece of information relating to the topic under
discussion.
TIP:
A tip offers a helpful tip relevant to the topic
at hand.
CAUTION:
A caution gives notice that an
!
action may have serious consequences and
could cause harm to equipment or personnel, or
could cause delays or other problems.
Information and specifications are subject to change.
Updates and supplementary information are available on the
Meyer Sound website:
http://www.meyersound.com
Meyer Sound Technical Support is available at:
Tel: +1 510 486.1166
Fax: +1 510 486.8356
Email: techsupport@meyersound.com
INTRODUCING THE JM-1P LOUDSPEAKER
The JM-1P self-powered loudspeaker is a high-Q, arrayable
loudspeaker suited for a wide range of applications. Utilizing
Meyer Sound's patented REM™ technology and trapezoidal
cabinet design, the JM-1P can be deployed in tightly-
packed array clusters to deliver coverage that is propor-
tional to the number of units in the array. While JM-1P point
source arrays are optimized for horizontal installations, they
can also be used vertically when necessary. With its scal-
able coverage and versatile QuickFly
JM-1P loudspeaker can be used for touring, rental, and
fixed installations.
JM-1P Arrayable Loudspeaker
Boasting a wide operating frequency range of 53 Hz to
18 kHz, the JM-1P delivers a remarkably smooth sound with
ample low-frequency headroom. Designed and manufac-
tured at Meyer Sound headquarters in Berkeley, California,
the JM-1P's drivers include one low-frequency 15-inch long
excursion cone driver, and one high-frequency 4-inch com-
pression driver with an REM manifold coupled to an
extremely accurate horn. The JM-1P is distinguished by its
constant-Q horn that provides a 20-degree horizontal by 60-
degree vertical coverage. The unit's consistent polar
response and trapezoidal enclosure allow for tightly packed
arrays with minimal overlap in high frequencies.
®
rigging options, the
7
Hide quick links:
Advertisement
Table of Contents
