Table of Contents
Advertisement
44
Messages
Options with your messages
First
In addition to reading your mes-
Enter the List menu
sages, you can select the mes-
by pressing
sage, press »OPTION« and:
Select »Messages«
• Delete it
• Send a reply (only in inbox)
Outbox If you have entered a mes-
• Forward it to another phone
sage to be sent either as an SMS
number
message or via IrDa, but do not
• Edit it before sending it
want to send it right away, you can
• Call the sender (only in inbox)
store it in the Outbox.
• Send it via IrDA
Sent items The messages you
New message To send a message
send are automatically stored
you have to specify certain parame-
under »Sent items« from where
ters if these have not already been
they can always be retrieved again.
specified by your network operator.
Enter the Message setup menu to
Drafts If you do not want to send
set up these parameters once and
your message right away and have
for all – otherwise you will be
not yet decided how to send it,
asked to specify them each time
select »Save message«, and your
you wish to send a message.
message is automatically stored in
By default, your phone is set to
»Drafts«.
use the Wheel mode editor when
composing your message. How-
ever, it will be with much advan-
tage to switch to the built-in T9®
text input feature, enabling you to
List menu
compose text messages with only
• Send as SMS
one keypress per letter (See p. 46).
To be able to send SMS messages
you have to enter your network
Once you have selected »New
operator's telephone number for
Message«, you can start
this special service and to set up
entering your message.
different parameters for your mes-
sages. Enter the Setup menu to set
Press »OK« when you have
up these parameters once and for
completed your message.
all. See p. 67.
Select whether you want to
send the message as an SMS
• Send via IrDA
message or via IrDA.
If you select »Send via IrDA«, your
phone will automatically activate
Press »YES« to send the mes-
the IrDA port. If a connection is
sage. Press »NO« to store it
established successfully, the IrDA
in your Outbox.
port will automatically be deactivat-
Select »Save message« if you
ed 1 minute after the end of the
want the unspecified message
transmission.
to be stored in »Drafts«.
within 1 minute, the IrDA port will
automatically be deactivated and
you will have to try again.
List menu
If no connection is established
45
Facts & Tips
• If while writing a message you are
interrupted by an incoming call, your
message will be stored automatically
»Drafts«
in
.
• When communicating via IrDA, the
distance between your mobile phone
and the receiving unit should not
exceed 40 centimetres.
• Remember, your first responsibility
is safety. Use extreme caution with
using message features while driving.
Advertisement
Table of Contents
