Using The Footswitch - Yamaha THR100HD Owner's Manual

Using the Footswitch

Some of the amp's functions and switch settings can be controlled with your feet using the supplied footswitch.
THR100HD
l
q
THR100H
l
e
q [THR100HD] AMP I/II
Switches the front panel Amp Select switch
setting between AMP I and II.
w [THR100HD] Amp I+II
Switches the front panel Amp Select switch to
I+II (lamp lit).
Press the switch again to enable the Amp I/II
switch q setting.
e BOOSTER
Switches the BOOSTER function ON/OFF. Both
Amp I and Amp II are switched simultaneously.
* Only switches the BOOSTER function ON/OFF
for the amp that has its front panel BOOSTER
switch in the ON position. The switch has no
effect if both the Amp I and Amp II front panel
BOOSTER switches are in the OFF position.
r REVERB
Switches the reverb effect ON/OFF. Both Amp I
and Amp II are switched simultaneously.
20
w e
r
r t
t
t FX LOOP
Switches the signal from the rear panel EFFECT
LOOP SEND/RETURN jack ON/OFF. Both Amp
I and Amp II are switched simultaneously.
y TO AMP
Use the supplied footswitch cable to connect
this terminal to the TO FSW terminal on the rear
panel of the amp.
CAUTION
Always switch the amplifier's power OFF
before connecting the cable.
y
y