To Switch The Tv Off; Initial Settings; Initial Aps (Automatic Programming System); Operating The Tv - Metz 42TN92 Operating Instructions Manual

Home entertainment plasma-tv-set 42“ pip
Table of Contents

Advertisement

To switch the TV off:

• Press the "
(stand-by)" button on the re-
mote control, so the TV will switch to stand-by
mode and the GREEN LED will become RED.
To power down the TV completely, press
On/Off switch " ",
or,
Unplug the power cord from the mains
socket.

Initial Settings

Initial APS (Automatic Programming
System)
The following menu will be displayed on the
screen when you turn your TV on for the first
time. APS, searches and sorts all channels
and stores them automatically on your TV,
a c c o r d i n g t o t h e t r a n s m i s s i o n o f
programme systems in your area.
AUTO PROGRAM
Language
Country
PLEASE CHECK ANTENNA CABLE
AUTO. PROGRAMMING SYSTEM
First of all choose Language and Country by
using
/
and
fect the sort process in APS. To start APS,
press the RED or "OK" button.
APS is running...
UK - I
After APS is finalized, the programme table
will appear on the screen. In the programme
table you will see the programme numbers
and names assigned to the programmes.
English
UK
Cancel
OK
/
buttons. This will af-
155,25 Mhz
Cancel
If you do not accept the locations and / or the
programme names of programmes, you
can change them from the
(See
page 48)

Operating The TV

You can operate your TV using both the re-
mote control handset and the buttons on the
set.
Operating with the buttons on the
TV set
Volume setting and programme selection
can be made by using the buttons on the
control panel at the bottom of the TV.
Volume Setting
Press the "-
or the "
+" button to increase volume, so
a volume level scale (slider) will be dis-
played at the bottom of the screen.
Programme Selecting
Press the " " button to select the next
programme or the " " button to select the
previous programme.
Entering The Menu
Press the "MENU" button on the control
panel at the bottom of the TV to enter the
menu.
"
/
" and "
are used as navigation buttons in
AV Mode
Press the "AV" button on the control panel
at the bottom of the TV to switch your TV to
EXT modes.

Operating With Remote Control

The remote control handset of your TV is de-
signed to control all the functions of your TV.
The functions will be described in accor-
dance with the menu system of your TV.
Functions of the menu system are de-
scribed in Menu System section.
- 41 -
Program Menu.
" button to decrease volume
+ / -
" buttons on the TV
the
menu.

Advertisement

Table of Contents
loading

Table of Contents