Table of Contents
Advertisement
4.
The appropriate driver is shown highlighted. Press Enter to proceed.
5.
Return to the Windows 2000 Setup screen. Press Enter to proceed.
The message about setup loading files appears. At this point, simply
follow the Microsoft Windows 2000 installation procedure.
C. Existing System Installation
1.
Boot Windows 2000 and log on as Administrator.
2.
Right click on
3.
Click on the
button.
4.
Click the "+" sign to the left of the SCSI and RAID controllers line.
Find the adapter desired for the driver upgrade and double click on
the entry. Click on the
5.
Information on the currently installed driver is displayed, and
additional driver details can be viewed by clicking the Driver
Details.... button.
6.
To update the existing driver, click the Update Driver button. The
Upgrade Device Driver Wizard
7.
Make sure that the item
selected, then click on the
8.
Make sure that the item
the appropriate LSI driver disk that contains the Windows 2000 driver
required to support your LSI adapter(s) and press Enter. The LSI
driver disk was created earlier.
9.
The system scans the existing driver database and the floppy disk
drive for drivers for the selected adapter.
10. A list of suitable drivers appears. The entry for the upgrade driver can
be verified by scrolling the display to the right, and viewing the
Location field. Highlight the driver for the upgrade installation disk and
click on the Next button.
5-10
and click on
My Computer
tab, and then click on the
Hardware
tab.
Driver
begins. Click on the Next button.
Search for a suitable driver for my device
Next
Floppy disk drives location
Properties
Device Manager
button.
Chapter 5: OS Installation
.
is
is checked. Insert
Advertisement
Table of Contents
