Table of Contents
Advertisement
B. NetWare 6.0 New Installations
Novell NetWare can automatically detect NetWare 6.0.
C. NetWare 4.2 New Installations
1.
Begin the file server installation according to the instructions in the file
server installation chapter in the Novell NetWare Installation Manual.
2.
When the NetWare installation procedure prompts you for a driver
disk, insert the LSI driver for NetWare diskette into drive A: Then use
the INS key to select an unlisted driver. A dialog box appears. If the
driver disk is in the A: drive, press Enter to continue. The
LSI_U3NW.HAM driver appears as a selection.
3.
Highlight Disk and CD-ROM Drivers (e.g., IDEATA). Press Enter and
load an additional driver. Then press the INS key. The system always
defaults to the A: path. Highlight the HAM driver and press Enter.
Select Yes to save and move the driver into the operating system.
Press Enter, the system will start to copy the files.
4.
Load a separate instance of the driver for every LSI SCSI controller
channel or host adapter present in the system. Load the LSI SCSI
driver twice with different slot number from STARTUP.NCF file as
follows:
load LSI_U3NW.HAM Slot=10009
load LSI_U3NW.HAM Slot=10010
5.
When prompted for a slot number, accept the slot numbers displayed.
Make sure to write these slot numbers down for future reference.
6.
When asked to edit the STARTUP.NCF file, make sure the
LSI_U3NW.HAM is loaded once for each LSI controller SCSI channel
present in the system. Add the statement SLOT=<slot number> to
each load line in the STARTUP.NCF, by specifying the slot numbers
written down in step 5 above, with only one slot number per load
instance.
ASUS PR-DLSR533 motherboard user guide
5-19
Advertisement
Table of Contents
