Answering A Call; Call Transfering; Transferring After Answering; Automatic Transferring Before Answering - Iridium ICHU1000 Operating Instructions Manual

Answering a Call

NOTE: When the speaker is off you can see that you are being
called, (the display will show "Incoming Call") but there will be
no sound in the speaker. The speaker can be toggled on and off
using:
1. When the handset rings, remove it from the hook and communi-
cate as on an ordinary telephone.
2. Adjust the volume in the earpiece or loudspeaker by means of:
3. When you want to stop communicating, or when you hear a busy
tone, hang up.

Call Transfering

A call can be transfered to another CU. The procedure depends on
whether or not the call is answered before it is transferred.

Transferring AFTER Answering

When you answer a call, the display shows:
Connected
To transfer the call:
1. Press:
Enter number
_
6
2. Now, key in the extension number to which the call should be
transferred.
3. To transfer the call, press:
Call is
transferred
- or:
To cancel transferring the call, press:

Automatic Transferring BEFORE Answering

A call can be transferred to another CU automatically before it is
answered. To see if the auto transferring function is enabled,
press:
The display will show eg.:
Call trans-
fer enabled
Local: 1001
Delay: 0 sec 10
The auto transferring parameters can be set up individually for each
handset in the function menu:
1. To enter the function menu, press:
2. To select the "Setup" item, press:
3. To find the "Transfer" item, use:
and press:
Call trans-
fer disabled
or
0125