Placing A Call - Iridium 9505A User Manual

06Using-kg.fm Page 42 Wednesday, November 3, 2004 9:36 PM

Placing a Call

To place a call, your phone must be powered on,
have a SIM card inserted, be unlocked, and be in
contact with the satellite network. See "Accessing
the Network" on page 147 for network information.
You can enter a phone number up to a maximum of
20 digits. The digits are displayed in two rows, 16
digits in the top line and four digits in the next line.
Dial a Number
1. Rotate and fully extend the satellite
Tip: Press and
0
hold to
get +
Tip: If you 2. Enter the number using the digit keys. As
make a
mistake, press
C
once to
delete the last
digit, or press
C
and hold to
clear all digits.
3. Press
If the call connects and is answered,
appears on the display for a few seconds, followed
End Call?
by
42 Using Your Phone
antenna. "See Holding the Phone" on
page 40.
you begin entering digits, you will see
You must enter the phone number in
international format:
[international access code,
[country code] [phone number]
Note: If you are calling another Iridium
satellite subscriber, dial the subscriber's
Iridium number.
O
Calling
. You will see
the number you dialed.
You will see either the flashing message
Calling
or the flashing messages
Registering...
, and the phone will play a
series of setup tones.
.
Call?
.
00 +
, or ]
followed by
Calling
,
Connected