Wireless Isp Mode - ActForNet LEGUANG N800 Configuration Manual

In some cases, you may want to set up virtual access point to separate the wireless network.
N800 supports up to 2 virtual access points. Click "Virtual AP", supply the SSID, authentication
scheme and key and then click "add". After you click "Apply", the system will reboot with newly
added virtual access points:
5. Now you should be able to see the wireless network you just configured from your PC or
tablet, smart phones, etc. Click the network and supply the password/key you just
configured to access the network.
3.4

Wireless ISP mode

1. Switch to Wireless ISP mode
Since the default mode is not bridge mode, you need to manually change the operating mode as
following:
After you click "Apply", the system will ask you to confirm whether to reboot the system to
make the change take effect.
LEGUANG N800 Configuration Guide
ActForNet Technologies Copyright 2014 P a g e | 13