Chapter 4 Meter Memory Function - BeneCheck Plus series User Manual

Chapter 4 Meter Memory Function

The BeneCheck PLUS Meter automatically stores up to 460 test results, which
includes all the blood glucose 360, uric acid 50 and total cholesterol 50 test
results and control test results. It also provides you with 7-, 14-, 21- and 28-day
averages of the blood glucose test results. The memory counts up from M01
through M360 for glucose test, M01 through M50 for uric acid and total cholesterol
test, respectively. Please follow these directions to recall stored test results.
Directions :
1. Make sure that no test strip is inserted in the meter.
2. Press the left "M" button once to turn the Meter on. After a short "beep" sound
a full display will appear on screen then the meter enters standby mode.
Note :
● The day average function can be applied to glucose test mode only, uric acid
and total cholesterol test mode do not have the day average function.
3. Press the left "M" button once again and the meter stays at memory mode. The
7-day average (7 DAY.A) will display on the Screen.
29