Testing Procedures For Blood Uric Acid; Testing Procedures For Blood Total Cholesterol - BeneCheck Plus series User Manual

3.3 Testing procedure for Uric Acid
1. Insert the BeneCheck PLUS Uric Acid Test Strip and take a blood sample
according to the instructions for lancing device in the system.
2. Touch the sample inlet of the strip to the drop of blood sample until the
meter sounds a "beep" which means the sample has been drawn into strip
successfully.
3. The screen will display a count down from 15 seconds. After 15 seconds the
screen will display the blood uric acid results.
3.4 Testing procedures for Total Cholesterol
1. Insert the BeneCheck PLUS Total Cholesterol Test Strip and take a blood
sample according to the instructions for lancing device in the system.
2. Make sure to get enough blood sample volume.
3. Touch the sample inlet of the strip blood sample until the reaction zone has
been full of enough amount of blood sample after that a "beep" sound will be
heared accordingly.
4. The screen will display a count down from the required test 26 seconds. After
counting down the screen will display the blood total cholesterol result.
26