Mps Configuration - Asus Motherboard NCLV-D (A) Product Manual

Legacy USB Support [Auto] Legacy USB Support [Auto] Legacy USB Support [Auto]
Legacy USB Support [Auto] Legacy USB Support [Auto]
Allows you to enable or disable support for legacy USB devices. Setting to
[Auto] allows the system to detect the presence of USB devices at
startup. If detected, the USB controller legacy mode is enabled. If no USB
device is detected, the legacy USB support is disabled.
Configuration options: [Disabled] [Enabled] [Auto]
USB 2.0 Controller [Enabled] USB 2.0 Controller [Enabled]
USB 2.0 Controller [Enabled] USB 2.0 Controller [Enabled] USB 2.0 Controller [Enabled]
Allows you to enable or disable the USB 2.0 controller.
Configuration options: [Enabled] [Disabled]
USB 2.0 Controller Mode [HiSpeed] USB 2.0 Controller Mode [HiSpeed] USB 2.0 Controller Mode [HiSpeed] USB 2.0 Controller Mode [HiSpeed] USB 2.0 Controller Mode [HiSpeed]
Allows you to set the USB 2.0 controller mode to HiSpeed (480 Mbps) or
FullSpeed (12 Mbps). Configuration options: [HiSpeed ] [FullSpeed ]
4.4.2 4.4.2 4.4.2

MPS Configuration

MPS Configuration MPS Configuration
4.4.2 4.4.2 MPS Configuration MPS Configuration
The items in this menu allows you to configure the Multi-Processor Table.
Select an item then press <Enter> to display the configuration options.
MPS Configuration
MPS Revision
MPS Revision [1.4] MPS Revision [1.4] MPS Revision [1.4] MPS Revision [1.4] MPS Revision [1.4]
Allows you to select the multi-processor system revision.
Configuration options: [1.1] [1.4]
4 - 1 8 4 - 1 8 4 - 1 8
4 - 1 8 4 - 1 8
[1.4]
Select MPS Revision.
C h a p t e r 4 : B I O S s e t u p C h a p t e r 4 : B I O S s e t u p C h a p t e r 4 : B I O S s e t u p
C h a p t e r 4 : B I O S s e t u p C h a p t e r 4 : B I O S s e t u p