Setting Up The System; Placing The System On The Pedestal; Adding The System To Your Wi-Fi Network; Installing The Soundtouch™ App - Bose wave soundtouch Owner's Manual

Setting up the System

Placing the system on the pedestal

The SoundTouch pedestal provides the network connection for
™
the Wave music system.
®
Note: Before you start setting up this system, be sure to read
"Important setup options" on page 7.
1. Place the SoundTouch
™
2. Carefully set your Wave
SoundTouch pedestal.
™
• Make sure the rear feet of the Wave
the recesses on top of the SoundTouch
• Make sure the Wave
®
edges of both units are aligned.
Place rear feet
into recesses
3. Insert the SoundTouch™ pedestal cable into the Bose link
connector.
8 - English
pedestal on a flat, stable surface.
music system on top of the
®
music system fit into
®
pedestal.
™
music system sits flat and the side
®
SoundTouch
pedestal
Adding the system to your Wi-Fi
Before you can use SoundTouch
SoundTouch app on a computer that is on your home network.
™
Next, you will use the app to connect the Wave
music system to the network. The app guides you through the
setup process.
Make sure you follow the instructions on your computer.
Note: If you have already set up SoundTouch
system, just launch the app and click
ExPlORE > SETTINGS > Systems > Add SySTEM
to add another system.
Installing the SoundTouch™ app
1. From a computer that is on your Wi-Fi network, open a
browser and go to:
http://www.Bose.com/soundtouch_app
Tip: If you want SoundTouch
Windows Media
computer where your music library is stored.
™
2. Download and install the SoundTouch
You are now ready to connect the system to your network.
Note: Do not connect any cables to the system until the app
instructs you to connect the cables.
network
®
you must install the
™
SoundTouch
®
for another
™
to play your iTunes
™
Player music library, use the
®
app on your computer.
™
™
or
®