Adjusting The Snooze Time; Turning Rds On Or Off; Selecting The Continuous Play Source; Changing The Time Format - Bose wave soundtouch Owner's Manual

Personalizing Your Wave

Adjusting the snooze time

This setting determines the duration of time the system remains
silent when the snooze function is activated.
1. until -SETUP MENU- is displayed.
Press and hold
2. repeatedly until SNOOZE- 10 MIN is displayed.
Press
3.
Press to change the snooze time to
10-60 minutes (in 10-minute increments).
4.
Press to exit the setup menu or wait 10 seconds for the
setup menu to exit automatically.

Turning RDS on or off

This setting enables or disables your system to display Radio
Data System (RDS) information. The RDS is a system that transmits
useful information, such as station name, program information and
the current time. RDS is used only on FM and is displayed only if it
is included in the FM broadcast signal.
1. Press and hold until -SETUP MENU- is displayed.
2. Press repeatedly until RAdIO TExT- is displayed.
3. Press to select OFF or ON.
4. Press to exit the setup menu or wait 10 seconds for the
setup menu to exit automatically.

Selecting the continuous play source

The Wave SoundTouch music system has a continuous play
® ™
feature. When a CD stops playing, you can program another source
to automatically start playing.
1. Press and hold until -SETUP MENU- is displayed.
2. Press repeatedly until CONT PlAy- is displayed.
3. to select AUx, FM, AM, or NO.
Press
4. Press to exit the setup menu or wait 10 seconds for the
setup menu to exit automatically.
24 - English
SoundTouch™ Music System
®

Changing the time format

You can choose to have the display show the time in
12-hour (AM/PM) or 24-hour time.
1. until -SETUP MENU- is displayed.
Press and hold
2. repeatedly until TIME- is displayed.
Press
3. to select 12 HOUR or 24 HOUR.
Press
4. Press to exit the setup menu or wait 10 seconds for the
setup menu to exit automatically.

Adjusting the display brightness

The brightness level of the display automatically adjusts itself for
low and high ambient light conditions. This feature brightens the
display for better visibility in high ambient light conditions and dims
the display making it less intrusive in low ambient light conditions.
High and low brightness settings can be set independently.
1. Press and hold until -SETUP MENU- is displayed.
2. Press repeatedly until BRIGHT HI- is displayed.
3. Press to set the high display brightness level to a
value from 8-15.
4. Press again to display BRIGHT lO-.
5. Press to set the low display brightness level
from 1-8.
6. Press to exit the setup menu or wait 10 seconds for the
setup menu to exit automatically.