Table of Contents
Advertisement
15
G. To change flame speed, press the SPEED
show "V1" to "V5" when pressing this button.
H.
Under the unlock mode
(
set for low heat 750W ,
indicator will show
"--". Press it for the third time, then the mechanism will stop function. After 10 seconds,
will show 0F
"
".
I.
Press "TIMER"
ranges from 1 to 8 hours, which will be shown on the indicator from "1H" to "8H". Timer is turned off when the
indicator shows "0H". If the appliance is restarted, timer also needs to be reset again.
J.
When you
turn on the appliance, all the backlight will be lighted up. Do not press any button for 20 seconds, all
the backlight will be off.
K. Press the "ON/OFF"
NOTE: This remote control must remain within 8 meters or 26 feet of the appliance to be effective and this
range may be reduced as the battery power is depleted.
7.3 PANEL CONTROL
Panel control is the same as remote control.
"
"
,
to activate the heater press the HEAT
,
)
the indicator will show
button, this sets the timing for switching the fireplace off automatically. The timer
buttom to turn off the appliance.
button. There are 5 speeds to choose from.
"
"
button. The initial set-up heat level will be
"-". To adjust the heat level press again for high heat (1500W ,
The
indicator will
) the
the indicator
Hide quick links:
Advertisement
Table of Contents
