Wriring Procedure For Dsp Flash Microprocessor; [C] Update Dsp Flash Microprocessor Procedure - Marantz SR9600 Service Manual

[C] UPDATE DSP FLASH MICROPROCESSOR PROCEDURE

NECESSARY EQUIPMENT
• Windows PC (With Serial Port)
• RS-232C Cable straight type (9 Pin female - 9 Pin female)
• Update Tool (UpgradeDSP_sr9600.exe)
• Update data (00M11AJ499Dxx.mot)
NOTE: xx is a revision number.
CABLE CONNECTION
Disconnect the mains cable from the Unit.
Connect RS-232C on the rear panel of the Unit and Serial
Port of windows PC with RS-232C cable.
Connect the mains cable into the Unit.
WRITING PROCEDURE FOR DSP FLASH
MICROPROCESSOR
Turn on the Unit, and press AUTO, MULTI SPEAKER and
MEMORY button simultaneously more than 1.5 seconds.
And turn on update mode.
Turn the input selector until CS DSP CODE UPGRADE is
displayed on FL Display.
Press the ENTER button, and decides to LOADING MODE.
Launch up the writing software.
Double click cs495xx_V0083ID folder. (A holder name may
be changed by the version updated.)
[DSP flash MICROPROCESSOR
Windows PC (Serial Port
•
• RS-232C
•
(UpgradeDSP_sr9600.exe)
•
NOTE: xx
Windows PC Serial Port
RS-232C
DSP Flash DSP Flash
AUTO MULTI SPEAKER MEMORY
1.5
INPUT SELECTOR
UPGRADE
ENTER
Upgrade_sr9600.exe
cs495xx_V0083ID
)
44
)
(9Pin 9Pin
(00M11AJ499Dxx.mot)
RS-232C Port
FL Display CS DSP CODE
LOADING MODE
]
)
3
(