Allen Organ Company Renaissance 230 Owner's Manual page 33

CAUTION
Do not plug the instrument into any current source other than 105-128 volts, 50/60
Hertz alternating current (AC). A verified grounded outlet is essential to proper
operation and protection of the instrument. Proper polarity should be checked with
an AC circuit analyzer before connecting the organ.
Do not change the cable plug or remove the ground pin or connect with a two-pole
adapter.
If you are in doubt about your electrical connection, consult your local electrician or
power company.
In churches where circuit breakers are turned off between worship services, the
circuit breaker affecting the organ console AC power should have a guard installed to
prevent its being accidentally switched off.
Read and comply with all instructions and labels that may be attached to the
instrument.
Warning : This equipment generates, uses, and can radiate radio frequency energy
and, if not installed and used in accordance with the instruction manual, may cause
interference to radio communications. It has been type tested and found to comply
with the limits for a Class B Computing Device in accordance with the specifications
in Subpart J of Part 15 of FCC Rules, which are designed to provide reasonable
protection against such interference in a residential installation. Should this
equipment cause interference to radio communications, the user at his own expense
will be required to take whatever measures may be necessary to correct the
interference. Whether this equipment actually causes the interference to radio
communications can be determined by turning the equipment off and on. The user is
encouraged to attempt to correct the interference by one or more of the following
measures:
Reorient the receiving antenna.
Relocate the organ with respect to the receiver.
Move the organ away from the receiver.
Plug the organ into a different electrical outlet, so that the organ and receiver are on
different branch circuits.
If necessary, the user should consult the dealer or an experienced radio technician for
additional suggestions.