Advertisement
GENERAL PRECAUTIONS REGARDING THE INSTALLA-
TION, SERVICE AND MAINTENANCE FOR e-BRIDGE ID
GATE (KP-2004)
The maintenance should be done by a qualified service technician.
1) When installing the e-BRIDGE ID Gate, follow the procedure described in the co-packed Unpacking
Instructions.
2) No person other than specialized service technicians can unpack or install the e-BRIDGE ID Gate.
3) Be sure to unplug the power cable of the equipment before starting the installation, service or main-
tenance.
4) Be sure to unplug the power cable of the equipment before disconnecting the ground wire, and be
sure to connect the ground wire securely before plugging the power cable.
5) Unplug the power cable of the equipment and clean the area around the prongs of the plug and the
area around the outlet once a year or more. Accumulated dust could cause a fire.
6) Arrange the power cable of the equipment or other wires properly after the installation so that no one
trips over them.
7) Basically the equipment should not be operated when it is disassembled or any part is removed.
8) Be sure not to touch the live or drive sections of the equipment when its power is ON.
9) Tools
-
Use the designated jigs or tools if any.
-
Use the recommended measuring instruments or equivalent if any.
10)Check the rating plate of the equipment or other cautionary labels at the service or maintenance.
Clean or reattach them if they are stained or falling off.
11)Store the PC boards in antistatic envelopes and handle them wearing a wristband because IC
devices on them can easily be ruined by static electricity. Before wearing a wristband, unplug the
power cable of the equipment and make sure that no charged objects insulated such as plug outlets
are in the vicinity.
12)When collecting and disposing of the used equipment, supplies or packing material, follow the rele-
vant local regulations or rules.
13)Return the equipment to the normal status and check if it operates normally after the installation,
service or maintenance.
Warning:
Confidential information in this manual shall be handled with extra care. Wrongful handling of such
information may be punished under law.
Advertisement
