Advertisement
3.
e-BRIDGE ID GATE SETTING CODE LIST
Code
08-1772
Card reading device setting
To enable the e-BRIDGE ID Gate, a card reading device should be set in the order of
"ABYYZZZZ".
(Enter the corresponding values to "A", "B", "YY" and "ZZZZ".)
•
AB:Special setting
•
A: Debugging NIC
0: Not used
1: Used
•
B: Interface
0: USB connection
1: N/A
•
YY:Authentication
00: No authentication using a noncontact IC card
02: Authentication using a noncontact IC card (KP-2003)
03: Authentication using a noncontact IC card (KP-2005)
04: Authentication using a noncontact IC card (KP-2004)
•
ZZZZ: Sub-code
0000: No authentication using a noncontact IC card
0002: Use Card ID of a noncontact IC card
Example:
When using the e-BRIDGE ID Gate (KP-2004):
When canceling card authentication with the e-BRIDGE ID Gate:
08-1927
LDAP server attribute name setting for card authentication (authentication ID)
<Default: eBMUserCard>
LDAP server attribute name for the authentication ID should be set.
© February 2007 TOSHIBA TEC CORPORATION All rights reserved
Items/Contents
e-BRIDGE ID GATE SETTING CODE LIST
3 - 1
<Acceptable value: 8 digits>
00040002
00000000
KP-2004
3
Advertisement
