8.7 Units
This function is used to change between Metric and Imperial mesurement systems.
8.8 Language
The system can choose between 3 languages:
•
English
•
French
•
Greman
Select the
icon to return to the previous menu.
8.9 Firmware Update
The internal software of the transmitter can be updated using the USB interface connected via a PC
computer. Once this function is activated, all functions of the transmitter stop. To avoid any loss of control
of the vehicle, turn its receiver off before entering this mode. A confirmation is requested.
When the firmware is updating, never disconnect the USB cable or remove the battery or the transmitter
will become unusable.
This function can be helpful only when connected with computer. Follow the steps as shown below:
1.
Download and open the newest official software.
2.
Connect a transmitter with a computer by USB cable.
3.
Enter transmitter firmware upgrade menu and press OK to complete.
8.10 Factory Reset
Resets the system to its factory settings. The system will display a prompt asking for confirmation. Select
"Yes" to reset.
8.11 About CR4TS
This menu contains: Product name, Firmware version, Hardware version and transmitter ID.
35