Table of Contents
Advertisement
Break return
Controls the reduction of braking during each pulse. If set to 60%, when the brakes are active, the system
will remove 60% of the brakes strength on each pulse.
Delay
Determines how long it takes for the A.B.S. system to take effect. At a setting of 0%, the A.B.S. system will
take effect as soon as the brake is applied. The higher the value, the longer it will take for the A.B.S. to
function.
Cycle length
Increases or decreases the time between pulses. The higher the value, the longer the pulse
Trigger point
Configures the point at which the A.B.S. starts to function. The higher the percentage, the further the
trigger has to be moved to activate the A.B.S.
Duty cycle
Changes the length of each pulse and the gap between them. As the value changes, the length of
the braking waves peaks and troughs will change independently of each other and will no longer be
symmetrical.
Steering mix
A.B.S. can be reduced automatically while turning. This function mixes braking and steering to turn
reduce the A.B.S. or replace it with a constant braking pressure.
To have constant braking unless turning simply move the wheel the opposite direction so that the header
shows %E.
To set the functions:
1.
Select the desired submenu.
2.
Move the wheel at the bottom of the screen left to reduce the value or right to increase the value.
Select the
icon to reset the function.
Select the
icon to return to the previous menu.
21
Hide quick links:
Advertisement
Table of Contents
