Commander Connect Quick Reference Manual

personal speed dials program system
speed dial list –
Program your personal
speed dial list – numbers numbers and names
and names. Only external numbers
can be programmed into speed dials
Press the directory key, then
Press the directory key, then
Press the scroll down key
Select personal entries
Select system entries and then
Select the location you
Enter the system password
want to program, and
Select the location you
Enter the number
want to program, and
(no leading zero is required)
Enter the number, and then
Select confirm
Select confirm
When prompted enter a name
When prompted to enter a name
Press 2 once for A, twice for B, three
Press 2 once for A, twice for B, three
times for C; press 3 once for D, twice for
times for C; press 3 once for D, twice for
E, three times for F; and so on.
E, three times for F; and so on.
Wait two seconds for the screen cursor
Wait two seconds for the screen cursor
to move on before entering the next letter.
to move on before entering the next letter.
A maximum of ten characters per
A maximum of ten characters per
name (including spaces) is allowed.
name (including spaces) is allowed.
On completion of the name
On completion of the name
Select confirm
Select confirm
Press the hands free key to finish
Then select the outgoing line group
programming
Press the hands free key to finish
programming
dial a number from
your personal
dial a number in the
speed dial list
system speed dial list
Press the directory key, then
Press the directory key, then
Select personal speed dial
Select system speed dial and then
Select the desired location
Enter the first letter of the name
and the number will be dialled
Select the entry and the number is dialled
system speed dials
using an analogue
Any extension can program the
phone
500 system speed dial numbers once
they enter the system password
The Commander Connect supports
tone phones with timed break recall
If you have problems dialling or using
the 'Recall key' check with the
phone supplier that they use tone
dialling and timed break recall
make an external call to retrieve a
call from park
Lift handset or use hands-free if available
Obtain a free line by dialling 0
Dial 712 from any phone
The parked call is retrieved
make an internal call
diverting calls
Lift handset or use hands-free if available
Dial the station number (20, 52), or
Dial 9 for the operator divert all calls
Lift handset or use hands-free if available
transfer external
Dial 732
call to an
Dial the station number, or
internal station
Dial the external phone number
(including line access code 0)
Press the RECALL key (R)
Dial the station number
cancel divert all calls
Replace handset
Lift handset or use hands-free if available
put an external Dial 732
call on hold
divert calls when your
Press the RECALL key (R)
telephone is busy
Replace handset to continue to use phone
Note: Call is held for thirty seconds when Lift handset or use hands-free if available
the telephone is idle. If the telephone
Dial 733
is busy, it will ring when the
Dial the station number, or
handset is replaced
Dial the external number,
(including Line access code 0)
to park an
external call
cancel divert a
Press the RECALL key (R)
call on busy
Dial 712
Lift handset or use hands-free if available
Replace handset
Dial 733
divert calls when program your personal
your telephone speed dial list
is not answered
Lift handset or use hands-free
(after four rings) if available
Dial 75
Lift handset or use hands-free if available
Enter the location (01-30)
Dial 734
where you want to store the number,
Dial the station number, or
Dial the number to store,
Dial the external phone number
Replace the handset
(including Line access code 0)
dial a number
cancel divert a
from your personal
call on no answer
speed dial list
Lift handset or use hands-free if available
Lift handset or use hands-free if available
Dial 734
Dial 74
Enter the location (01-30)
voicemail
of the number required, and the
number is automatically dialled
Note: Voicemail services require the
Voicemail Module to be installed.
dial a number
turn on your voicemail from the system
speed dial list
When you are allocated a voice mailbox
'Divert on no answer' is automatically
Lift handset or use hands-free if available
set to your voice box
Enter a system speed dial number –
The voice code is 710
8001 to 8500
To divert all your calls to your
vice mail dial 732 followed by 710
To divert on busy to your voice mail
dial 733 followed by 710
key feature summary
Feature Code Feature Code
Account Codes 791 Night Service – on/off 738
(Station 20 only)
Call Pick-up 726 Operator/Station 20 9
(incoming calls only)
Call Pick-up Group 727 Page – Keystations 7
(all calls)
Tone Protection 725 (R725) PA – answer 717
CLIR activation 724 PA announcement 720
Conference R3 Page All 795
Display Messages 729 (1–8) Park R712
Divert All 732 xx Pick up parked call 712
Divert on Busy 733 xx Redial 77
Divert on No Answer 734 xx Reminder Call 718
Do Not Disturb 736 Reminder Call cancel 718*
– set/cancel
Log in / Log out 723 Retrieve a call placed on hold 719
of Hunt group
Door Open 731 (R731) Reset telephone 739
Station Lock – change code 714 xxx Ring Back R5
Station Lock - lock/unlock 713 xxx Saved Number Redial 781–785
External Call Hold R Speed Dial 74 (01–30)
– personal numbers
Long Line Station 52 Speed Dial – system numbers 8001-8500
Follow Me 735 Speed Dial / Programming 75 (01–30)
(Password) xx personal numbers
Forward Recall R780 Voice call 715
(to an individual Keystation)
Group divert All Calls 792 Voice Mailbox number 710
Group Divert on Busy 793 Voice mail–retrieving 711
Group Divert on No Answer 794 Waiting tone R8
132 777
www.commander.com
Commander Connect Keystation Standard Handset
Quick Reference Guide, Version 1, Release 1
S/I760/74 CDR356
12/02 ®Commander is the registered trademark of Commander Australia Limited ACN 082 384 343
Connect
Standard Keystation Quick Reference Guide