Commander M7100N User Manual

to hold a call.
press
press again to return to the
first call on hold. Check the display for
confirmation or additional information.
Note: If you have difficulty selecting a line
on your M7100N Keystation, ask your
System Administrator to check your
keystation's programming. Your keystation
must be assigned to use an exchange line
or line pool.
about the memory key.
The memory key can store a telephone
number or feature code to give you one
touch dialling or feature activation. You can
change the memory key by programming it
with a new number or feature code.
Remember: Press to check
memory or line key.
memory key
04/02
® Commander is the registered trademark of Commander Australia Limited ACN 082 384 343.
programming memory keys.
External Autodial
a
if you are on a call or a line with dial tone,
b
press or
press
dial the external number
press to store the number
label your new key
Internal Autodial
if you are on a call or a line with dial tone,
press or
press
dial the extension number
label your new key
if you are on a call or a line with dial tone,
press or
press
press and the feature code
label your new key
Erasing memory keys
If you are on a call or a line with dial tone,
press or
press
press to erase the key
Note: M7100N is equivalent to Economy
Keystation referred to in some documentation.
Commander Australia Limited
Sales 1300 138 833 Service 1300 138 899
www.commander.com
a
.
b
c
d
e
a
.
b
c
d
Features
a
.
b
c
d
a
.
b
c
S/I 742/213
M7100N
Keystation User Guide
Return
to Menu