Table of Contents
Advertisement
SPECIAL MODE SETTINGS
Setting the White Balance
With the normal settings, this digital camera automatically adjusts the white balance under most
lighting conditions. However, if you want to specify the lighting conditions or change the overall
tone of the image, the white balance can be manually set.
1
Select the white balance menu from the Special Mode
Setting Screen (see page 82).
2
Select the white balance setting, and press the SET
button.
H: The digital camera will make the white balance
adjustment automatically based on the natural and
artificial light conditions. This is the setting used in the
auto mode.
g: For shooting outside on a sunny day.
h: For shooting outside on a cloudy day.
e: For shooting inside under fluorescent lighting.
i: For shooting inside under incandescent lighting.
S: For more accurate adjustment or when the light source cannot be specified. The setting
procedure when this icon is selected is given below.
1
Select the S icon and press the SET button.
œ The S icon moves to the left.
2
Fill the entire screen with plain white card (or piece of paper, etc.) and press the
SET button.
œ The white balance setting programmed with the S icon is retained even if the
other white balance setting (H, g, h, e, or i) is set. By selecting the
S icon and pressing the SET button, these same settings can be used again.
œ This completes the white balance setting.
To return to the Shooting Setting Screen, press the MODE button, or select the C
icon and press the SET button.
NOTE
œ To cancel the white balance setting and return to the automatic setting, perform step 1 in and
select H, then press the SET button.
HINT
To capture sepia-tone images
œ At step 2 in step 2, instead of using a white card, use a blue card to set the white balance. You
can experiment by changing the card color with which the white balance is performed for
different results.
85
English
WHITE BALANCE
13
Advertisement
Table of Contents
