Page 1
Petrol Back Pack Blower B650 USER MANUAL, MAINTENANCE INSTRUCTIONS AND SPARE PARTS READ THIS MANUAL CAREFULLY BEFORE OPERATING THE MACHINE WARNING: THIS SYMBOL INDICATES IMPORTANT SAFETY PRECAUTIONS...
This Back Pack Blower is a 2 stroke fast running power tool and is designed to be used in a domestic application for clearing leaves and litter from large areas. The Mitox B650 Blower is designed and manufactured to provide long life and efficient operation. Read and understand this instruction manual thoroughly before operating the machine.
SAFETY NOTICES General Warning Decal Hot Decal Located on top of blower housing Located on muffler guard International Warning Symbols Information Symbol Read and Wear eyes, Symbol understand ears and Hot Surface Safety/Alert Finger Description Operator’s head Risk of burn Severing Manual protection...
This product has been designed to be used as a blower and should not be used for any other purpose; doing so could result in unforeseen accidents and injuries occurring. Only approved Mitox accessories should be used with this product.
Work Clothing Wear durable clothing or work overalls, including long trousers and long- sleeved shirts. Wear sturdy non-slip work shoes. Keep long hair away from the engine blower intake. Contain hair during work with a cap or hairnet. Pre Operation Checks Before beginning work each component of the blower should be checked to make sure that it is in proper safe working order.
FUEL PREPARATION & STORAGE Fuel Safety The engine of this blower is designed to run on a two-stroke fuel oil mixture, this fuel is highly flammable. Never store cans of fuel or refill the fuel tank in a place where there is a source of heat or fire, which might ignite the fuel. Do not smoke while operating the blower or refuelling.
NOTE OPERATION To set the throttle to half speed, pull the throttle lever back, then Starting Cold Engine push and hold the throttle lock button (E) whilst releasing the throttle lever. (B) (C) (D) 1. Set ignition switch (A) to position 1 (ignition on). 2.
Operating Blower Read the Safe Operation section on page 4. 1. Always allow the engine to warm up at fast idle before operating at full throttle. 2. Set engine speed with throttle lever. 3. Use lower engine speed to blow dry leaves from walkways, patios, drives, etc. 4.
Cylinder Cooling Fins The engine cooling fins can become clogged with debris that will cause overheating of the engine. Periodically check cooling fins and remove any debris. Fuel Filter Using a wire hook, remove fuel filter from the fuel tank and replace as necessary.
IMPORTANT After every use, check that all nuts, bolts and screws are securely fastened and tighten if necessary. In the event of an accident, breakdown or blockage, ensure the engine is turned off before any work is carried out to rectify this. Make sure the engine has stopped and is cool before performing any service to the machine.
Warranty does not extend to failure due to fair wear and tear. The manufacturer undertakes to replace any spare parts that are classified as defective by an appointed Mitox service dealer. The manufacturer will not accept liability for the replacement of the machine, either partially or wholly, and/or consequential damages.
Need help?
Do you have a question about the B650 and is the answer not in the manual?
Questions and answers