Wall Mounting - Panasonic KX-HNC200AZ Installation Manual

Wall mounting

R Mount the camera on the stable location
where the unit can be adequately
supported when installing.
R The AC adaptor should be connected to a
vertically oriented or floor-mounted AC
outlet. Do not connect the AC adaptor to a
ceiling-mounted AC outlet, as the weight of
the adaptor may cause it to become
disconnected.
R Do not mount the camera on a soft
material. It may fall down, break or cause
injury.
R Do not mount the camera on the following
places: plaster board, ALC (autoclaved
lightweight cellular concrete), concrete
block, plywood less than 25 mm thick, and
etc.
1
Drive the screws (not supplied) into the
wall.
Longer than 20 mm
1
Space 1.3 mm
2
1
Note:
R Use the following template when
determining the location of the screw
holes.
28 mm
2
2
Mount the camera to the wall.
Screws
1
28 mm
2
3
Adjust the angle of the camera.
Setup
2
1
11