Bosch TSB 1300 professional Instruction Manual page 7

OBJ_BUCH-1381-001.book Page 7 Monday, November 29, 2010 1:18 PM
The severed plug must be disposed of to avoid a
possible shock hazard and should never be in-
serted into a mains socket elsewhere.
Products sold in AUS and NZ only: Use a resid-
ual current device (RCD) with a rated residual
current of 30 mA or less.
Functional Description
Read all safety warnings and all in-
structions. Failure to follow the
warnings and instructions may re-
sult in electric shock, fire and/or se-
rious injury.
Intended Use
The machine is intended for impact drilling in
brick, concrete and stone as well as for drilling
in wood, metal and plastic. Machines with elec-
tronic control and right/left rotation are also
suitable for screwdriving and thread-cutting.
Product Features
The numbering of the product features refers to
the illustration of the machine on the graphics
page.
1 Key type drill chuck
2 "Drilling/Impact Drilling" selector switch
3 Lock-on button for On/Off switch
4 On/Off switch
5 Rotational direction switch
6 Wing bolt for depth stop adjustment
7 Wing bolt for adjustment of auxiliary handle
8 Auxiliary handle (insulated gripping surface)
9 Depth stop
10 Handle (insulated gripping surface)
11 Chuck key
12 Screwdriver bit*
13 Universal bit holder*
*Accessories shown or described are not part of the
standard delivery scope of the product. A complete
overview of accessories can be found in our acces-
sories program.
Bosch Power Tools
Technical Data
Impact Drill
Article number
Rated power input
Output power
No-load speed
Impact frequency at
no-load
Rated torque
Right/left rotation
Spindle collar dia.
Max. drilling dia.
– Brickwork
– Concrete
– Steel
– Wood
Chuck clamping range
Weight according to
EPTA-Procedure
01/2003
Protection class
The values given are valid for a nominal voltage [U] of
230 V. For different voltages and models for specific
countries, these values can vary.
Please observe the article number on the type plate of
your machine. The trade names of the individual ma-
chines may vary.
Assembly
Before any work on the machine itself, pull
the mains plug.
Auxiliary Handle (see figure A)
Operate your machine only with the auxilia-
ry handle 8.
The auxiliary handle 8 can be set to any position
for a secure and low-fatigue working posture.
Turn the wing bolt for adjustment of the auxilia-
ry handle 7 in anticlockwise direction and set
the auxiliary handle 8 to the required position.
Then tighten the wing bolt 7 again in clockwise
direction.
1 609 929 X83 | (29.11.10)
English | 7
TSB 1300
Professional
3 601 AA1 0..
W 550
W 270
-1
min 0 – 2700
-1
min 0 – 41600
Nm 1.5
mm 43
mm 13
mm 13
mm 10
mm 25
mm 1.5 – 13
kg 1.8
/II