Table of Contents
Advertisement
Operating Your Kambrook Mini Oven
Before First Use
Remove and safely discard any
packaging material and promotional
labels before using the oven for the
first time. Wash the baking tray in
warm, soapy water, rinse and dry
thoroughly. Wipe the wire oven rack,
glass door and exterior with a soft,
damp cloth then dry thoroughly.
Place the oven on a level,
flat surface.
Plug the oven into a 230V or 240V
power outlet and turn the power on.
Set the timer dial to 15 minutes. Select
the TOAST/COOK
element selection dial and allow the
oven to operate until the timer counts
down to 0 and turns 'OFF'. This should
eliminate any oil residue that may
have been used for packing and
shipping.
Allow the oven to cool before
inserting the accessories. The oven is
now ready to use.
NOTE: When operated on for
the first time, the oven may give
off vapours for up to 15 minutes.
This is due to the protective
substances on the heating
elements. It is safe, not detrimental
to the performance of the oven
and will dissipate with use.
IMPORTANT: The oven will not
heat until ALL of the following are
activated:
•
the element selection dial
has been selected
•
the timer has been set on a
cooking time
function on the
Operating Your Kambrook
Mini Oven
1.
Slide the wire oven rack into
either the high or low position
inside the oven.
2.
Place food to be grilled,
reheated, or cooked onto the
baking tray, then place baking
tray onto the wire oven rack and
close the door.
3.
Turn the element selection dial to
the desired function:
a. GRILL
b. REHEAT
c. TOAST/COOK
4.
Turn the timer dial to the required
cooking time (up to 15 minutes).
NOTE: Both the element
selection dial and the timer dial
must be selected for the mini
oven to operate.
5.
Heating will begin and the timer
dial will start count down. Power
indictor light will illuminate.
NOTE: Do not move the oven
during cooking as the oven is
very hot.
6.
At the end of the selected time,
a short bell will ding when the dial
reaches 0 and the oven will turn
'OFF', the Power indicator light will
extinguish. If further cooking time
is required, reset the timer dial
to the required time. If no further
cooking time is required and the
timer dial is set to 'OFF', manually
turn the element selection dial
7
Advertisement
Table of Contents
