Replacing An Enclosure Management Module - Dell Storage Center sc100 Owner's Manual

Figure 19. Hardware Alert Identifying the Enclosure with the Failed EMM
4. In the Hardware tab navigation pane, expand the enclosure identified in the previous step.
5. Select I/O Modules. The status of each EMM is displayed in the I/O Modules tab.
6. Select the failed EMM to the display its location in the I/O Module View tab.
Figure 20. Rear View of the Enclosure Showing the Failed EMM

Replacing an Enclosure Management Module

Use this procedure to replace a failed EMMs.
Prerequisites
1. Use SupportAssist to send diagnostic data to Dell Technical Support Services.
24
Replacing SC100/SC120 Components