Radio Shack TRS-80 Model 100 Basic Manual page 205

If you would like the data file to be listed, enter
rn
(for Yes). Enter Cf[) (for No)
if you do not want to see the data listed.
If you do request the data to be output, you will see the prompt
OUTPUT ON LCD, LINE PRINTER, OR BOTH
(L,P
or
B)?
Here you have a choice of output devices. Enter L if you want the data displayed only
on the LCD, enter P if you want the data output to the printer only, or enter B if you
want the output to go to both the LCD and the printer.
If you request output to the printer, make sure that you have your printer attached to
the printer port and that it is turned on. Otherwise, the program will wait for the
printer before proceeding.
The data is displayed and/or printed in a single column as illustrated below:
23.5
35.7
45.2
t t t
•••
43
47
41
After the data is displayed, or if no data display was requested, you will see the
message
SORTING, PLEASE WAIT
After the data has been sorted, the display will clear and you will be prompted with:
OUTPUT SORTED VALUES (Y
or
N)?
Enter
rn
(for Yes) if you want to output the data values in sorted order, or enter
00
(for No) if you do not desire a listing of the sorted data values.
If you do request the sorted values to be output, you will again be prompted to direct
the output to the LCD, the Printer or both as shown below:
OUTPUT SORTED VALUES (Y
or
N)? Y
OUTPUT ON LCD, LINE PRINTER, OR BOTH
(L, P or B>?
The data values will be output in ascending order as illustrated below:
12
13
16
•••
• • •
82
86
91
199