Radio Shack TRS-80 Model 100 Basic Manual page 174

Experiment #2 Transferring Files to Another
Computer using TELCOM
You can transfer any ASCII file to another computer using TELCOM, one of the
built-in Application Programs of your Model 100. This includes any BASIC program
as long as it has been saved as a RAM file in ASCII format (SAVE
"FILENAME" ,A).
1. Link the two computers together as shown in the previous experiment.
2. Load and execute a communications program that allows data transfer in the host
computer.
3. Set communication parameters in the host that the Model 100 can match (refer to
your system's owner's manual or reference guide).
4. From the Model 100 Main Menu, position the cursor on the word TELCOM and
press~.
The display then shows:
M7I1E,10
PPS
Tel com: •
Find Call Stat Term Menu
<D
The first line reminds you of the current serial communications status.
@)
The second line is the TELCOM prompt which lets you select one of the
functions displayed on the last line of the screen.
@
The last line shows the definitions of the Function Keys in TELCOM.
5. Change the communication status to match those of the other computer by
pressing the Status Function Key
(~)
followed by the desired parameters.
6. Enter the Terminal Mode by pressing the Terminal Function Key «(fg). The
bottom line of the display should change to:
168