Table of Contents
Advertisement
Use the rocker switch << >> G to
adjust the sensitivity:
01 for high sensitivity
03 for normal sensitivity
Press the DSC button 5 after the
adjustment.
Display of station name with
Preset Naming System (PNS)
If you select a station, the display D a shows
the station frequency. Beyond that, this car
radio allows you to change this indication
and, for example, to enter the station name
instead (NDR, BBC, etc.). This is possible
under the following conditions:
Indications of FM and AM stations can only
be changed if they are memorized on the FM
(I, II, III) and AM memory bank, respectively.
Then, however, the zone ident for traffic
information broadcasts (ARI) will not be dis-
played.
Press the DSC button 5.
Press the rocker switch
"PRESET" shows in the display D a.
Select the station for which you want to
enter a name.
24
The station frequency is shown in the display
D a. Free entry fields are filled with dashes.
The first dash flashes. To enter any cha-
racter,
press the rocker switch << >> G.
The display successively shows a point, the
numbers (0 to 9), the capital letters (A to Z),
the blank and special charactarers (such as
modified vowels and punctuations).
If you want to enter the next character,
shortly press the on/off button 1.
In order to change the previous character,
press the on/off button 1 for more
than 2 seconds.
When you have finished the entry and wish to
enter the name for another station, press the
corresponding preset button. The entered
values are stored automatically.
Press the DSC button 5 to quit.
The entry of the station name can be cleared
by memorizing another frequency on that
preset button (press the preset button for a
F until
/
longer time). The display then shows the
frequency of the newly stored station.
Cassette operation
Inserting/ejecting a cassette
Switch the car radio on.
Insert the cassette with track A or 1
facing upwards, but do not apply any
force when doing so.
The cassette is played in the direction used
last.
The display D a shows which track is play-
ed.
To eject the cassette, press the FR and FF
button ; simultaneously.
Fast winding
Fast forward
Press the FF button ;. At the end of
the tape, the set switches to the other
track (autoreverse).
Interrupt fast forward by
pressing the FR button.
Fast rewind
Press the FR button ;. At the end of
the tape, the set switches to the other
track.
Interrupt fast rewind
by pressing the FF button.
Advertisement
Table of Contents
