Table of Contents
Advertisement
_ _ _ _ LEAR SIEGLER, INC.
DATA PRODUCTS DIVISION
2.9 POWER TURN-OFF
If the unit is displaying information which must
be
retained, be sure
to
transmit this information to
the host immediately. This is necessary because
the display is cleared when power is removed from
the unit. An alternative is
to
send the information
to a printer prior to turning the unit off.
2.10 CLEANING
At periodic intervals, clean the exterior housing
and lightly dust the unit using a soft brush or
damp lint-free cloth. However, paper towels may
be substituted if desired. Remove smudges from
the CRT exterior housing
¥.~th
conventional spray
2-10
cleaners or alcohol. Do not use petroleum base
cleaners, such as lighter fluid, as this could
be
harmful to the painted surface.
US4~
only a lint-free
soft cloth
to
clean the CRT screen.
Be
careful not to
.cratch the CRT screen, and do not
U8e
freon
cleaners, alcohol, or ammonia.
2.11 INSPECTION
Periodically inspect keyboard usembly for
freedom of movement. Determine whether the
intensity of character trace on the CRT .creen has
not diminished. Any required mechanical or
electrical adjustment should be performed only by
an authorized Lear Siegler Service representative
to
ensure W81"l"anty.
Advertisement
Table of Contents
