Maintenance Schedule - Fly Synthesis STORCH CL Maintenance Manual

Hide thumbs

Table Of Contents

Table of Contents

No other factors are quite important for the

regular and diligent attention to the routine maintenance steps carried out within the recommended

intervals.

The same applies for a prompt corrective action , introduced for all minor troubles found during the

aircraft in-service life.

This chapter contains the maintenance instructions and checks to be performed on the air-frame,

equipments and engine.

For detailed instructions applicable to the engine and its components (e.g. disassembly, cleaning,

inspection, testing, repair, lubrication, torque loads and reassembly), the operator should refer to the

Operator's Manual and Spare Parts List, last issues

The maintenance schedule for STORCH is based upon 10 inspections to be accomplished within the

following limits.

PRE--FLIGHT INSPECTION: to be accomplished before each flight.

DAILY INSPECTION: to be accomplished daily, before beginning the flight activity.

10-HOURS INSPECTION: to be accomplished after 10 flight hours.

20-HOURS INSPECTION: to be accomplished after 20 flight hours.

50-HOURS INSPECTION: to be accomplished after 50 flight hours.

100-HOURS INSPECTION: to be accomplished after 100 flight hours.

150-HOURS INSPECTION: to be accomplished a after 150 flight hours.

200-HOURS INSPECTION: to be accomplished after 200 flight hours.

300-HOURS INSPECTION: to be accomplished after 200 flight hours.

ANNUAL INSPECTION: to be accomplished once a year independently of flight hours totalised.

GENERAL OVERHAUL: to be accomplished an airframe and engine at the manufacturer's facilities after-

150 flight hours.

AQ 002 Rev.00

Storch CL, HS, S

Maintenance Manual

(for Rotax 912 UL/S, 914 UL and

Jabiru 2200 version)

1. ROUTINE MAINTENANCE

1.1

safety

1.2