Table of Contents
Advertisement
4.ASSEMBLY
4.ASSEMBLY
Install each part in order of the numbers.
4-1. Feed mechanism
Feed base assy
8. Two set screws
(*Temporarily tighten)
* After adjusting the feed dog, tighten the two screws.
Refer to "5-5. Adjusting the forward/back, right/left position of the feed dog" (page 5-03).
4-01
3. Feed base assy
6. Set screw collar
(Press right and tighten two set screws)
Felt
Feed rocker shaft
Feed rocker arm
LZ2-B850,B851
Lower shaft
4. Feed rocker shaft (Slide left)
(Pull out from the bottom.)
1. Felt
2. Feed lifting link
Spacer
Retaining ring
5. Feed rocker shaft (Press left)
7. Two set screws
1071S
1072S
1070S
Advertisement
Table of Contents
