Sharp LC-32D44U Service Manual page 37

PC
Start measurement
Adjust RB to the target xy values.
MG1RXXXX
MG1BXXXX
* XXXX indicates the adjusted values between 0000 and 1023
(4 digit decimal number with zero fill).
* G is fixed.
* The default adjustment value of RGB is the parameter value of
Repeat until RGB
the WBI1 command multiplied by 2.
become the target
values.
Writing of adjusted values
MSET0003
Deleting adjustment patterns
MSET0000
Completion of adjustment
The adjustment value is
reflected in the image.
Adjustment values are set.
OK
Writing is complete.
OK
Deletion is complete.
OK
5 – 20
LC-32D44U
Set