Coding 1 - Viessmann VITOTRONIC 300 GW2 Installation And Service Instructions Manual

Additional information

Coding 1

Call up coding level 1
Coding 1
Cod. 1
System type
Cod. 1
Codings
Function Coding as per factory setting
Address: Value
System type 00: 1
System circuit A1,
without domestic hot water heating without domestic hot water heating
114
Only those coding addresses are displayed which correspond to the system type
and equipment concerned and can be changed accordingly.
1. Press 9 and w simultaneously for
approx. 2 seconds.
2. Call up the required coding address
with the or button;
press to confirm.
3. Change the value with the
button;
press to confirm.
4. Press 9 and w simultaneously for
approx. 1 second.
Possible change
00: 12
00: 13
00: 14
00: 15
00: 16
00: 17
00: 18
00: 19
00: 10
Access coding level 1.
Address flashes.
Value flashes.
or "Accepted" appears briefly in the
display, then the address flashes
again. Further addresses can now be
selected with the
Exit coding level 1.
System circuit A1,
with domestic hot water heating
Mixing valve circuit M2,
without domestic hot water heating
Mixing valve circuit M2,
with domestic hot water heating
System circuit A1 and mixing valve circuit
M2,
without domestic hot water heating
System circuit A1 and mixing valve circuit
M2,
with domestic hot water heating
Mixing valve circuits M2 and M3,
without domestic hot water heating
Mixing valve circuits M2 and M3,
with domestic hot water heating
System circuit A1 and mixing valve circuits
M2 and M3, without domestic hot water
heating
System circuit A1 and mixing valve circuits
M2 and M3, with domestic hot water
heating
or button.