Ford 2014 FUSION HYBRID Owner's Manual page 370

You can find more information on the rear
view camera in another chapter. See Rear
View Camera (page 181).
Enable Valet Mode
Note: If the system locks, and you need to
reset the PIN, enter 3681 and the system
unlocks.
Valet mode allows you to lock the system.
No information is accessible until the
system is unlocked with the correct PIN.
E142607
On
Off
Limited
Note: Details on the charge port light ring
functions are in another chapter. See High
Voltage Battery (page 160).
Settings
Access and adjust system settings, voice
features, as well as phone, navigation and
wireless settings.
Language
Distance
Temperature
System Prompt Volume
MyFord Touch™
Charge point light ring
Illuminates when plugging in, opening doors, pressing the
unlock button on your remote, and while charging.
Does not illuminate.
Cord Acknowledgement: Illuminates when plugging in.
Charge Status: Illuminates when opening doors or
pressing the unlock button on your remote.
System
Select to have the touchscreen display in English, Spanish
or French.
Select to display units in kilometers or miles.
Select to display units in Celsius or Fahrenheit.
Adjust the volume of voice prompts from the system.
367
(If Equipped)
1. Press the Settings icon > Vehicle >
Enable Valet Mode.
2. When prompted, enter a four-digit PIN.
After you press Continue, the system locks
until you enter the PIN again.
Charge Point Light Ring
Press the Settings icon >
Vehicle > Charge Point Light
E142607
Ring, then select from the
following:
System
Press the Settings icon >
Settings > System, then select
E142607
from the following: